To transfer your pictures and video files wirelessly to your PC, you need to configure a shared folder on your PC. Please follow the instructions below.

(The BLUE procedure will only need to be completed one time since the settings are saved for future use.)


On your pc:
Step1
a. Create a folder «pixavi» under c:/
b. Right click folder «pixavi» and select «sharing»

c. Click «share», type «everyone» and click «add»
d. Select read/write under permission level and click «ok»


Step2
a. Click start-button and type “Sharing Center”
b. Click the “Network and Sharing Center” icon
c. Click “Change advanced sharing settings” in the left panel
d. Turn off “Password protected sharing” and click “Save Changes”

 

On your Xcorder:

1 Select sync from main menu of the Xcorder.
2 Select PC.
sync-pc.JPG

3 Select sync.
sync-pc2.JPG

 

When the sync operation is complete, the transferred files will appear under the folder named pixavi on your PC.

 

Important to know about PC sync:

  • Administrator access is required on your pc to be able to set up wireless PC sync.
  • Remember to catalog the files located in the PC folder after each sync. This is because the sync process will potentially overwrite files from the previous transfers if these files share the same filename.
  • If you are transferring large video files, or a large quantity of picture files, the transfer can take several minutes. Please be patient.