FAQ
Default administrator password is: admin
Tue, 14 Oct, 2014 at 9:14 AM
1 Connect power and press the power button on WiDRIVE 2 2 Insert any USB storage device in the USB port of the WiDRIVE 2. 3 Select «Sync» and then select ...
Mon, 6 Oct, 2014 at 4:15 PM
To transfer your pictures and video files wirelessly to your WiDRIVE 1, you need to complete the following steps.
(The BLUE procedure will only need to be...
Thu, 2 Oct, 2014 at 6:03 PM
To transfer your pictures and video files wirelessly to your PC, you need to configure a shared folder on your PC. Please follow the instructions below.
(...
Thu, 9 Oct, 2014 at 1:56 PM
Before you start using the WiDRIVE 2 with your Xcaster, please make sure the WiDRIVE is enabled in the "Setup" > "Settings" > &q...
Mon, 24 Feb, 2014 at 6:28 PM
To transfer your pictures and video files wirelessly to your PC, you need to complete the following steps.
(The BLUE procedure will only need to be comple...
Wed, 12 Nov, 2014 at 3:30 PM
This procedure should help resolve these problems: - The administrator password is forgotten. - Camera does not start/boot normally. Required equipment: ...
Tue, 14 Apr, 2015 at 8:47 AM
You see a error message saying “check WiDRIVE disk” when trying to sync your media from The EX4000 to the WiDRIVE?
Try this:
Remove USB cable ...
Fri, 11 Apr, 2014 at 12:11 PM
You see a error message saying "WiDRIVE share not available" when trying to sync your media from The EX4000 to the WiDRIVE 1?
- Reset th...
Tue, 7 Oct, 2014 at 1:46 AM